Application / Industry

Your production.
Ruggedly connected, without a socket at the machine.

Cameras, access points, scanners and sensors in production and warehouse run over a single Ethernet cable. Rugged connections, centrally powered and managed.

One network for the whole hallCameras, scanners and sensors over PoE
Industrial cameraMonitoring above the line
PoE
Access PointStable Wi-Fi in the hall
PoE
Scanner / TerminalCapture at every station
USB-C
Sensor / displayCapture states and signals
PoE
Central PoE switchPowers hall and warehouse centrally from the control cabinet

In the hall, a socket at every position is rare and expensive

Cameras, Wi-Fi, scanners and sensors need power in places where there is no socket. PoE brings power and data to where they are needed.

Classic cabling

Power at the machine is a hassle

  • Plan a separate power supply for every position
  • Power supplies in harsh environments are prone to failure
  • Wi-Fi alone is often not reliable enough in the hall
  • Reconfiguring the line means pulling new cabling
With Power over Ethernet

One Ethernet cable brings power and data to every position

  • Power and data in one line, up to 100 metres
  • Central power from the control cabinet, fewer power supplies
  • Wired connections, stable even amid interference
  • New position? One extra cable, nothing more

To a connected production area in three steps

Installation is straightforward and quickly done. One Ethernet cable is enough.

1

PoE switch in the control cabinet

The switch sits centrally in the control cabinet and powers cameras, access points and sensors in the hall.

2

Run the cable to the position

An Ethernet cable runs to the machine, the warehouse aisle or the gate system. Power and data in one line.

3

Device runs immediately

As soon as the cable is plugged in, the device has power and is on the network. No power supply needed at the machine.

100 m
Range
per cable run
90 W
per port,
IEEE 802.3bt
1 cable
for power and
data at once
100%
IEEE 802.3
compliant

An injector brings PoE to the control element

The injector sits between the controller and the device. It takes the data from the network, adds the power supply and delivers both over a single cable to the device at the machine.

Data over Ethernet from the control element PoE: power + data one cable CONTROL ELEMENT Control / PLC INJECT POE PoE injector MACHINE HMI panel / camera Power Power supply
Ethernet: data and PoE
Power injection
Data flow

Components for your industrial network

Matched to each other and ready to ship. We put together the right combination for you.

PoE Texas Switch
PoE+ / PoE++ Switch
PoE Texas Switch
The central heart of it in the control cabinet. Powers cameras, access points and sensors in the hall.
up to 90 W/port100 mIEEE 802.3bt
View in shop
PoE Texas Injector
Single-port injector
PoE Texas Injector
Retrofit a single position without a new switch. Simply place it between switch and device.
30 WPlug & PlayIEEE 802.3at
View in shop
GAT-USBC-PD-V3
PoE to USB-C, 25 W
GAT-USBC-PD-V3
★ The only US-patented PoE-to-USB-C solution
Powers terminals, displays and tablets in production directly over the network.
25 W USB-CGigabitTerminal
View in shop
PoE network cabinet

Cameras above the line, access points in the warehouse, scanners at every station, all over one central switch.

The network hardware is bundled in the control cabinet. If a device fails, it is immediately visible and can be restarted remotely.

When the line is rebuilt, the device simply moves with it: run the cable, plug in, it runs. Without a new power line at the machine.

Why PoE for production and warehouse

Simple installation

Power and data over one cable. Separate power lines to every machine position are no longer needed.

Centrally powered from the control cabinet

All power supplies are bundled in the control cabinet instead of scattered in a harsh environment.

More stable than Wi-Fi alone

Wired connections stay stable, even around machines, metal and radio interference.

Scalable when reconfiguring

New station, new camera, new sensor? Lay the cable, plug in, up and running.

Answers about the industrial network with PoE

Yes. The connections are wired and immune to radio interference. For harsh environments there are industrial-grade switches and components. We advise you on the right version.

Up to 100 metres per cable without a separate power source. For greater distances, PoE extenders can be inserted to extend the range.

USB-C devices such as terminals and displays can be powered directly from the network via a PoE-to-USB-C adapter. A power supply at the station is no longer needed.

Yes. With a single-port injector, individual devices can be connected without replacing the entire infrastructure at once.

Planning your industrial network with PoE?

We advise you free and without obligation on which components are the right choice for your hall.

PoE for every use case