Description
Passive 1 port Gigabit Ethernet Injector without power supply
The GPOE-1 Injector has a passive PoE port. This means that it transmits power directly via the LAN cable without first checking whether the connected terminal device (PD) is PoE capable.
A current of up to 0.65 amps is supported at the PoE port. If you use the supplied Y-cable and use both current inputs at the same time, the maximum current strength increases to up to 1.25 amps.
Data is transmitted at a speed of up to 1000 Mbit/s ,
Power and data are transmitted via pinout mode A or B. The selection is made by plugging the power pack into the power input. If the Y-cable is used, power and data are transmitted via pinout mode A/B.