Passive 6 port Gigabit Ethernet PoE Injector without power supply
The GPOE-6AB-Y Injector has 6 passive PoE ports. This means that it transmits power directly via the LAN cable without first checking whether the connected terminal device (PD) is PoE capable.
A current of up to 0.65 amps is supported per PoE port. If you use the supplied Y-cable and use both current inputs at the same time, the maximum current increases to 1.25 amps.
Data is transmitted at a speed of up to 1000 Mbit/s, which corresponds to the Gigabit Ethernet standard.
Power and data are transmitted either via pinout mode A or B. The selection is made by plugging the power pack into the respective power input. If the Y-cable is used and both current inputs are used at the same time, current and data are transmitted via pinout mode A/B.